range
Basic Differences Between AM and FM
We need to mention a couple of other things before we leave the discussion of how radio works. We’ve talked about AM and FM radio, but we haven’t explained the real difference.
In fact, there is a lot of difference — and not just a difference in the station numbers on your radio dial.
The first type of radio service — the one we’ve been talking about in the last couple of modules — was AM radio.
The term modulation refers to how sound is encoded on a radio wave called a carrier wave; or, more accurately, how the sound affects the carrier wave so that the original sound can later be detected by a radio receiver.
In the top-left of this drawing the RF energy (carrier wave) is not modulated by any sound. There would be silence on your radio receiver.
Sound transmitted by an AM radio station affects the carrier wave by changing the amplitude (height) of the carrier wave, as shown on the left.
Unfortunately, this type of modulation is subject to static interference from such things as household appliances — and especially from lightening storms.
AM also limits the loud-to-soft range of sounds that can be reproduced (called dynamic range) and the high-to-low sound frequency range (called frequency response, to be explained below).
FM radio, which came along in the 1930s, uses a different approach than AM. It’s virtually immune to any type of external interference, it has a greater dynamic range, and it can handle sounds of higher and lower frequencies. This is why music, with its much greater frequency range than the human voice, sounds better on FM radio.
Note on the left that when the carrier wave of FM radio is modulated with sound that the distance between the waves, or the frequency of the carrier wave, changes.
Thus, AM radio works by changing the amplitude of the carrier wave and FM radio works by changing the frequency of the carrier wave.
Frequency Response
Frequency relates to the basic pitch of a sound — how high or low it is. A frequency of 20 Hz would sound like an extremely low-pitched note on a pipe organ — almost a rumble.
At the other end of the scale, 20,000 Hz would be the highest pitched sound that can be imagined, even higher than the highest note on a violin or piccolo.
As we’ve noted, frequency is measured in Hertz (Hz) or cycles per second (CPS). A person with exceptionally good hearing will be able to hear sounds from 20-20,000 Hz.
Since both ends of the 20-20,000Hz range represent rather extreme limits, the more common range used for FM radio and TV is from 50 to 15,000 Hz. (A typical AM radio signal does not cover this entire range.)
Although the 50-15,000 Hz doesn’t quite cover the full range that can be heard by people with good hearing, it covers almost all naturally occurring sounds. Note in the drawing above that the ear does not hear all frequencies of sound at the same loudness, but a good microphone does.
The sound level or amplitude of sound in radio and TV stations is monitored and adjusted with the help of a volume units meter (VU meter) meter. One model is shown on the left. Audio levels must be carefully controlled in broadcasting to keep noise and distortion from reducing the quality of sound.
Satellite Radio , work
Satellite radio is such a remarkably simple concept that one might wonder why it took until 2001 for the first space-based audio service to make its debut in the United States.
At least it’s simple on the surface: Take a music, news or talk station, beam the signal up to a satellite, and overcome the limitations of ground-based transmitters whose signals generally drop off as distance increases. Then make sure the programming is more appealing than traditional radio stations and cut down on the number of commercials in exchange for a monthly subscription fee.
But as it turns out, satellite radio is a whole lot more complex than it seems on paper – and it took cutting-edge technology to make the systems operated by Sirius Satellite Radio and XM Satellite Radio work.
XM and Sirius are not the first companies to enter the satellite radio industry: Worldspace Corp., a firm based in Washington, has provided satellite radio in Asia and Africa since 1998. But Worldspace was intended primarily for use in fixed locations, while the systems used by XM and Sirius are optimized to reach U.S. listeners on the go.
From the ground up
It took a number of years to develop the XM and Sirius systems.
Engineers had to figure out how to squeeze dozens of individual channels into a relatively small amount of bandwidth and come up with reliable methods of beaming signals from thousands of miles in space to roving antennas smaller than tennis balls.
They also had to develop inexpensive circuitry, or chipsets, to enable receivers to decode the satellite signals, which are encrypted to prevent reception by non-subscribers. Both firms are working on newer versions of their chipsets that will be smaller and use less power.
Sirius and XM each took somewhat different approaches, although the end result, from a lay person’s perspective, is the same: 100 channels of music, news, sports and other fare available virtually anywhere in the continental United States. The companies are trying to distinguish themselves with programming and attitude.
XM’s system uses two very powerful satellites floating in space directly above the equator. The spacecraft are in geostationary orbit — they appear from the ground to remain in fixed perches, because they move around the Earth at the same speed the planet is rotating.
Geostationary satellites are commonly used for all sorts of space-based communications because they enable use of inexpensive, fixed antennas. Satellite TV and Internet systems are two examples of consumer-oriented technologies that use this type of satellite.
Repeat that, please
Since geostationary spacecraft are above the equator, terminals on the ground must have a decent view of the southern sky to receive signals from them. This posed a challenge for XM, since listeners in cars often pass by obstacles, such as buildings, foliage or hills, which can block geostationary satellite signals.
XM’s solution is a network of repeaters – antennas on buildings and other sites that receive satellite signals from an optimally placed antenna and retransmit them. The repeaters are located primarily in built-up areas, where loss of the satellite signal is most likely to occur.
Each XM receiver is equipped to receive signals from both of the company’s Boeing 702 satellites and a repeater simultaneously. As long as one of the sources is available, the radio will play without interruption. In addition, the receivers have buffers that store programming for several seconds, allowing operation to continue even if no signal is available momentarily.
Sirius uses a trio of Loral FS1300 satellites in unique elliptical orbits in an effort to avoid the problems posed by geostationary satellites.
The orbits, shaped like figure eights, allow the satellites to appear higher in the sky than XM’s, cutting down on the potential for a listener to be out of range of a satellite signal — and allowing Sirius to have a much smaller number of repeaters.
Sirius’ repeater network also avoids the need for specialized antennas that can track the company’s non-geostationary satellites as they move about the sky, Sirius feeds its repeaters using capacity on a geostationary satellite leased from a traditional satellite operator. Listeners can’t tell that the signals they receive via the repeaters do not travel over Sirius’ fleet of satellites.
The Sirius satellites each spend about 16 hours over the United States, then whip around the other side of the Earth and return eight hours later for another stint hovering over Sirius’ listening area, according to Ted Hessler, the company’s vice president of space segment and enterprise operations.
Two Sirius spacecraft cover the United States at any given time, Hessler said.
In the studio
XM and Sirius both operate digital broadcast centers that combine dozens of individual recording studios with huge amounts of storage to hold hundreds of thousands of compact discs worth of music in digital format.
Programmers just point and click at the material they want to play, and it airs directly from the storage system at the appointed time. During transmission, the system also adds a short description of the music or other material for display on a small receiver screen.
That is one unique advantage to satellite radio — you can find out the artist and song title as each piece of music plays.
The 22 terabytes of storage capacity at XM’s facilities in Washington can hold about 250,000 CDs, said Anthony J. Masiello, XM’s senior vice president of operations.
Terry Smith, senior vice president and chief technology officer of Sirius, said his company’s studios in mid-town Manhattan have about seven terabytes of storage. While that is less than XM has, Smith says it’s plenty.
“Our library is constantly being refreshed as new content comes in,” Smith said.
Both companies also maintain large collections of CDs to augment their digital libraries. They also retransmit programming that originates elsewhere, such as news, sports and comedy channels, and maintain studios where artists perform live.
Another, less visible key to satellite radio is digital compression, a technique to use radio spectrum as efficiently as possible. Both satellite radio broadcasters use sophisticated algorithms to squeeze as much material as they can into the available bandwidth without causing audio quality to degrade.
XM and Sirius are each allocated 12.5 megahertz of radio spectrum by the U.S. Federal Communications Commission.
How have radio and TV broadcasting been used in education?
Radio and television have been used widely as educational tools since the 1920s and the 1950s, respectively. There are three general approaches to the use of radio and TV broadcasting in education:
- direct class teaching, where broadcast programming substitutes for teachers on a temporary basis;
- school broadcasting, where broadcast programming provides complementary teaching and learning resources not otherwise available
- general educational programming over community, national and international stations which provide general and informal educational opportunities
The most notable and best documented example of the direct class teaching approach is Interactive Radio Instruction (IRI).This consists of “ready-made 20-30 minute direct teaching and learning exercises to the classroom on a daily basis. The radio lessons, developed around specific learning objectives at particular levels of maths, science, health and languages in national curricula, are intended to improve the quality of classroom teaching and to act as a regular, structured aid to poorly trained classroom teachers in under-resourced schools.” IRI projects have been implemented in Latin America and Africa. In Asia, IRI was first implemented in Thailand in 1980; Indonesia, Pakistan, Bangladesh and Nepal rolled out their own IRI projects in the 1990s. What differentiates IRI from most other distance education programs is that its primary objective is to raise the quality of learning – and not merely to expand educational access – and it has had much success in both formal and non-formal settings. Extensive research around the world has shown that many IRI projects have had a positive impact on learning outcomes and on educational equity. And with its economies of scale, it has proven to be a cost-effective strategy relative to other interventions.
Mexico’s Telesecundaria is another notable example of direct class teaching, this time using broadcast television. The programme was launched in Mexico in 1968 as a cost-effective strategy for expanding lower secondary schooling in small and remote communities.Perraton describes the programme thus:
Centrally produced television programs are beamed via satellite throughout the country on a scheduled basis (8 am to 2 pm and 2 pm to 8 pm) to Telesecundaria schools, covering the same secondary curriculum as that offered in ordinary schools. Each hour focuses on a different subject area and typically follows the same routine – 15 minutes of television, then book-led and teacher-led activities. Students are exposed to a variety of teachers on television but have one home teacher at the school for all disciplines in each grade.
The design of the programme has undergone many changes through the years, shifting from a “talking heads” approach to more interactive and dynamic programming that “link[s] the community to the programme around the teaching method. The strategy meant combining community issues into the programs, offering children an integrated education, involving the community at large in the organization and management of the school and stimulating students to carry out community activities.” Assessments of Telesecundaria have been encouraging: drop out rates are slightly better than those of general secondary schools and significantly better than in technical schools. In Asia, the 44 radio and TV universities in China (including the China Central Radio and Television University), Universitas Terbuka in Indonesia, and Indira Ghandi National Open University have made extensive use of radio and television, both for direct class teaching and for school broadcasting, to reach more of their respective large populations. For these institutions, broadcasts are often accompanied by printed materials and audio cassettes.
Japan’s University of the Air was broadcasting 160 television and 160 radio courses in 2000. Each course consists of 15 45-minute lectures broadcast nationwide once a week for 15 weeks. Courses are aired over University-owned stations from 6 am to 12 noon. Students are also given supplemental print materials, face-to-face instruction, and online tutorials.
Often deployed with print materials, cassettes and CD-ROMS, school broadcasting, like direct class teaching, is geared to national curricula and developed for a range of subject areas. But unlike direct class instruction, school broadcasting is not intended to substitute for the teacher but merely as an enrichment of traditional classroom instruction. School broadcasting is more flexible than IRI since teachers decide how they will integrate the broadcast materials into their classes. Large broadcasting corporations that provide school broadcasts include the British Broadcasting Corporation Education Radio TV in the United Kingdom and the NHK Japanese Broadcasting Station. In developing countries, school broadcasts are often a result of a partnership between the Ministry of Education and the Ministry of Information.
General educational programming consists of a broad range of programme types – news programs, documentary programs, quiz shows, educational cartoons, etc. – that afford non-formal educational opportunities for all types of learners. In a sense, any radio or TV programming with informational and educational value can be considered under this type. Some notable examples that have a global reach are the United States-based television show Sesame Street, the all-information television channels National Geographic and Discovery, and the radio programme Voice of America.The Farm Radio Forum, which began in Canada in the 1940s and which has since served as a model for radio discussion programs worldwide, is another example of non-formal educational programming.
Search
Most search
BIG Market
good reading
- About Electromagnetic Pulse
- Electromagnetic Wave
- Basic Differences Between AM and FM
- Radio, a potential medium for education
- Satellite Radio , work
- Interactive radio for education
- How have radio and TV broadcasting been used in education?
- Radio
- Radio in Education
- Satellite radio for education
- Campus radio stations
- Radio for distance education






